Promise Technology VTRAK M610p Manuel télécharger pdf (Page 90)

VTrak M610p Product Manual

Managing Controllers

The RAID controller is are the heart of the VTrak subsystem. Controller

Management includes the following functions:

• Viewing the Controller (page 78)

• Locating a Controller (page 78)

• Viewing Controller Information (page 79)

• Viewing Controller Statistics (page 80)

• Making Controller Settings (page 80)

• Clearing an Orphan Watermark (page 81)

Viewing the Controller

To view information about the controller:

1. Click the Subsystem icon in Tree View.

2. Click the Controllers icon.

The controller information appears under the Information tab in Management

View. Controller information includes:

• Controller ID (1)

• Alias, if assigned

• Model, if applicable

• Status – OK means normal

• Readiness Status – Active or Standby

• Locate – Click on the button to locate the controller. See below

VTrak subsystems, such as the M610p, with only one controller will always show

that the second controller is “Missing.”

Locating a Controller

To identify a specific controller in the VTrak subsystem:

1. Click the Subsystem icon in Tree View.

2. Click the Controllers icon.

3. In Management View, click the Locate Controller button.

4. The Controller Dirty Cache LED and Status LED, on the back of the

Controller, will flash for one minute. See the illustrations below.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 283 284

Pas de commentaire

Promise Technology VTRAK M610p Manuel Page 90