Promise Technology VTRAK M610p Manuel télécharger pdf (Page 88)

VTrak M610p Product Manual

Shutting Down the Subsystem

You can only do part of this function in WebPAM PROe. Additional action is

required, as described below. To shutdown the subsystem:

1. Click the Subsystem icon in Tree View.

2. Click the Administrative Tools icon.

3. Click the Shutdown link in Management View.

A Shutdown or Restart tab will appear.

4. On the Shutdown or Restart tab, select Shutdown from the dropdown menu.

5. Click the Submit button.

6. In the confirmation box, type the word confirm in the field provided.

7. Click the OK button.

When the controller shuts down, your WebPAM PROe connection will be

lost.

8. Wait for no less than two minutes.

9. Manually turn off the power supply switches the back of the subsystem.

Monitoring the Shutdown

To monitor a shutdown, you must use the Command Line Interface (CLI) though

a serial connection to the VTrak.

At the “administrator@CLI>” prompt, type shutdown -a shutdown.

When the “Shutdown complete. It is now safe to power off the subsystem.”

message appears, turn off the power supply switches.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 283 284

Pas de commentaire

Promise Technology VTRAK M610p Manuel Page 88