Promise Technology VTrack M-Class M500p Manuel télécharger pdf (Page 163)

Chapter 5: Management with the CLU

155

CLU Connection

There are two connections methods for the CLU:

• Serial – Requires a null modem cable (included with VTrak) to connect the

serial ports on the Host PC and VTrak

• Telnet – Requires a network connection between the Host PC and VTrak’s

Management Port.

Serial Connection

Before you begin, be sure the null modem cable is connected between the Host

PC and VTrak, and that both machines are booted and running.

1. Start your PC’s terminal emulation program.

2. Press Enter once to launch the CLU.

Telnet Connection

If your Telnet connection has not been setup, refer to “Set Up Serial Cable

Connections” on page 25.

To start the telnet program:

1. Go to the command line prompt (Windows) or click the terminal icon (Linux),

then run:

telnet 192.168.1.56 2300

The IP address above is only an example. Use your VTrak's Management

port IP address. 2300 is the Telnet port for the VTrak.

The telnet login screen appears:

2. At the Login prompt, type the user name and press Enter.

The default user name is administrator.

3. At the Password prompt, type the password and press Enter.

The default password is password.

The CLI screen appears.

4. At the CLI prompt, type menu and press Enter

The CLU Main Menu appears.

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 315 316

Pas de commentaire

Promise Technology VTrack M-Class M500p Manuel Page 163