Promise Technology FastTrak SX4000 Lite Manuel d'utilisateur télécharger pdf (Page 34)

FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

Disk Array Recognition Order

During computer startup, the disk arrays on the FastTrak Controller card are

recognized in this order:

• The bootable array, designated in the FastBuild setup.

• Other arrays by their numbers (such as Array 1, Array 2…).

Array Recognition Order determines the order in which each array is assigned

the next available drive letter.

By way of example, say that your PC boots from its internal disk drive and has a

CD-ROM Drive. In addition, you have a FastTrak S150 TX4 with two arrays,

Array1 and Array2. When your system boots, the internal disk drive will be C:, the

CD-ROM will be D:, Array1 will be E: and Array2 will be F:.

Saved Disk Array Information

Note

Promise suggests that you record information about your disk

array(s) for future reference.

All disk array data is saved within the reserved sector of each arrayed drive.

Another feature of the FastTrak disk array system is to recognize drive members

even if drives are moved to different channels on the FastTrak Controller card.

Since each drive’s array data identifies itself to the array, it is possible to reorder

the drives without modifying the array setup. This is valuable when adding drives,

or during a rebuild.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 77 78

Pas de commentaire

Promise Technology FastTrak SX4000 Lite Manuel d'utilisateur Page 34