Promise Technology FastTrak SX4000 Lite Manuel d'utilisateur télécharger pdf (Page 32)

FastTrak S150 SX4 / SX4000 / SX4000 Lite User Manual

Hot Spare Drives

Any extra drive that is not assigned to an array will be recognized as a Spare

Drive. Such drives are designated “Free” in the View Drive Assignments screen

(see below).

[ View Drive Assignments ]

[ Keys Available ]

Channel : ID Drive Model Capacity Assignment Mode

CH 1: SEAGATEST380023AS 80630 Array1 S

CH 2: SEAGATEST380023AS 80630 Array1 S

CH 3: SEAGATEST380023AS 80630 Array1 S

CH 4: SEAGATEST380023AS 80630 Free S

Note: * --Bootable Array

[ ] Up [ ] Down [ESC] Exit Mode (S=Serial)

Figure 9. A Free Drive in the View Drive Assignments screen.

Spare Drives are automatically added to an array once a disk member of the

array has been detected as “failed.” To restore fault tolerance as quickly as

possible, the FastTrak Controller performs an automatic data rebuild on the

“spare” drive in the background without the need to restart the system.

At a later time, the failed drive can be physically removed and an extra drive

added in its place to function as the “spare” drive.

Partition and Format Array

Your new RAID array must be partitioned and formatted before use. Use the

same method of partitioning and formatting on an array as you would any other

fixed disk added to your computer system.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Pas de commentaire

Promise Technology FastTrak SX4000 Lite Manuel d'utilisateur Page 32