Promise Technology EX4650 Manuel d'utilisateur télécharger pdf (Page 131)

Chapter 5: Management with WebPAM PRO

119

3. Click the Controller icon.

4. Click the Battery tab in Management View.

In normal operation, the operational status of the battery shows Fully Charged

with a Reserve Capacity of 100%. If the battery is constantly recharging, its

reserve capacity drops significantly, or the battery remains discharged, replace

the battery. Also see “Viewing Enclosure Information” on page 121.

Silencing the Buzzer

To silence the buzzer for the current event:

1. Click the Subsystem icon in Tree View.

2. Click the Controllers icon.

3. Click the Controller icon.

4. Click the Buzzer tab in Management View.

5. Click the Mute button.

The buzzer goes silent but will sound again for future events.

Making Buzzer Settings

To make buzzer settings:

1. Click the Subsystem icon in Tree View.

2. Click the Controllers icon.

3. Click the Controller icon.

4. From the dropdown menu on the Buzzer tab, choose Settings.

5. Check the Enable Buzzer box to enable the buzzer.

Uncheck the box to disable the buzzer.

6. Click the Submit button

The changes take effect immediately.

Testing the Buzzer

You must enable the buzzer before you can test it. See “Making Buzzer

Settings,” above.

To test the buzzer:

1. Click the Subsystem icon in Tree View.

2. Click the Controllers icon.

3. Click the Controller icon.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 231 232

Pas de commentaire

Promise Technology EX4650 Manuel d'utilisateur Page 131