Promise Technology FastTrak S150 Manuel d'utilisateur télécharger pdf (Page 62)

FastTrak S150 TX2plus User Manual

System CMOS Issues

Set Motherboard CMOS Boot sequence to boot to FastTrak S150 TX2plus

On some Motherboard BIOS, it is necessary to set the Boot sequence to SCSI,

A:, C: since the Promise card is identified as a SCSI card.

Motherboard CMOS displays C: or D: drive failure during startup

See the Drive-Related Errors section.

Using an Onboard IDE Card with FastTrak S150 TX2plus

If an onboard IDE controller is installed with hard disks, enable support in the

Motherboard Standard CMOS Setup for the drives. Note that the onboard IDE

hard drives will then be the bootable hard disk unless the system BIOS has a

boot sequence setting with the option to specify booting to a different device.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 81 82

Pas de commentaire

Promise Technology FastTrak S150 Manuel d'utilisateur Page 62