Promise Technology FastTrak S150 Manuel d'utilisateur télécharger pdf (Page 13)

Chapter 2: Installation

Creating Your Disk Array

You will now use the onboard FastBuild™ BIOS utility to create your array using

the attached drives. There are three different scenarios in creating this array.

You can create an array for:

• Performance

• Security, using new hard drives (recommended)

• Security, using an existing hard drive and a new one

• Security, using Quick Initialization

The first three steps are the same for all three choices. After that, follow the

steps for the array you want to create.

1. Boot your system. If this is the first time you have booted with the FastTrak

S150 TX2plus card and drives installed, the Promise onboard BIOS will

display the following screen.

FastTrak S150 TXx (tm) BIOS Version 1.aa (Build xxxx)

No array defined . . .

Press <Ctrl-F> to ender FastBuild (tm) Utility

Or press <ESC> key to continue booting the system

2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu.

3. Press “1” to display the Auto Setup Menu below. This is the fastest and

easiest method to creating your first array.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 81 82

Pas de commentaire

Promise Technology FastTrak S150 Manuel d'utilisateur Page 13