Promise Technology VTrack M-Class M500p Manuel télécharger pdf (Page 21)

Step 7: Set IP Address with CLI or CLU

1. Press the arrow keys to highlight DHCP.

2. Press the spacebar to toggle to Disabled.

The current Management Port settings are displayed (above).

3. Record the information on this screen.

4. Press the spacebar to toggle DHCP back to Enable.

5. Press Ctrl-A to save these settings and move to the iSCSI Port 1screen.

To make Management Port settings manually:

1. Press the arrow keys to highlight DHCP.

2. Press the spacebar to toggle to Disabled.

3. Press the arrow keys to highlight IP Address.

4. Press the backspace key to erase the current IP Address.

5. Type the new IP Address.

6. Follow the same procedure to specify the Subnet Mask, Gateway IP

Address and DNS Server IP Address.

If you do not have a DNS server, skip the DNS Server IP address.

7. Press Ctrl-A to save these settings and move to the iSCSI Port 1 screen.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Pas de commentaire

Promise Technology VTrack M-Class M500p Manuel Page 21