Promise Technology FAST TRAK100TM Manuel d'utilisateur télécharger pdf (Page 7)

SY-P4ISR Quick Start Guide

Hardware

Installation

Install the Motherboard

Follow the steps below in order to perform the installation of your new SY-P4ISR Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency: Record the working frequency of your mPGA

CPU that should be clearly marked on the CPU cover.

FSB 400MHz

1.5GHz (100 x 15.0 ) 1.6GHz (100 x 16.0) 1.7GHz ( 100 x 17.0) 1.8GHz (100 x 18.0)

1.9GHz (100 x 19.0 ) 2.0GHz (100 x 20.0)

CPU Mount Procedure: To mount the Pentium

4 Socket mPGA478 processor

that you have purchased separately, follow these instructions.

1. Lift the socket handle up to a vertical position.

2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.

3. Seat the processor in the socket completely and without forcing.

4. Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard. The fan is a key component that stabilizes the

system. It prevents the equipment from overheating and prolongs the life of

your CPU.

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Pas de commentaire

Promise Technology FAST TRAK100TM Manuel d'utilisateur Page 7