Promise Technology VTRAK M310i Manuel télécharger pdf (Page 22)

VTrak M610i, M310i, M210i Quick Start Guide

Setting up VTrak with the CLU

1. At the administrator@cli> prompt, type menu and press Enter.

The CLU main menu appears.

Figure 19.CLU main menu

2. With Quick Setup highlighted, press Enter.

The first Quick Setup screen enables you to make Date and Time settings.

Setting system date and time

1. Press the arrow keys to highlight System Date.

2. Press the backspace key to erase the current date.

3. Type the new date.

4. Follow the same procedure to set the System Time.

5. Press Ctrl-A to save these settings and move to the Management Port

configuration screen.

Making Management Port settings

By default, DHCP is disabled on VTrak and the default Management Port IP

address is set to 10.0.0.1. The TCP Port is set to 2300.

Use a new Management Port IP address to log into the VTrak over your network.

Manual IP settings

To make Management Port settings manually:

1. Press the arrow keys to highlight IP Address.

2. Press the backspace key to erase the current IP Address.

3. Type the new IP Address.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Pas de commentaire

Promise Technology VTRAK M310i Manuel Page 22