Promise Technology Ultra100 TX2 Manuel d'utilisateur télécharger pdf (Page 9)

Ultra100™ TX2 User Manual

Controller Card Installation

Installing the Ultra100 TX2 controller card in a system is a simple process. The card

fits into any available 32-bit PCI slot (must be PCI 2.1 or 2.2 compliant), or the 32-bit

portion of 64-bit PCI slot on the system’s motherboard (see Figure 1 below).

1. Remove the cover of your system.

2. Remove the inside slot cover of an available 32-bit PCI slot on the

motherboard.

3. Install the Ultra100 TX2 controller card into the open slot (see Figure 1

below).

4. Attach your system case’s 2 - or 4-pin LED cable to the LED connector on

the Ultra100 TX2 controller card (see Figure 2 next page). Make sure that

pin 1 on the connector is aligned with pin 1 of the cable.

5. Fasten the controller card bracket to the system case (see Figure 1).

Figure 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 38 39

Pas de commentaire

Promise Technology Ultra100 TX2 Manuel d'utilisateur Page 9